What is a CD Changer Interface Adaptor?
CD Changer interface adaptors are small electronic control units or converter leads (dependent upon vehicle and radio) and their approximate sizes are (L80mm x H35mm x D55mm) for the box type or (L160mm to L400mm) for the lead type. CD changer interface adaptors are a simple way of connecting and controlling an aftermarket CD changer (such as Alpine, Kenwood, Sony) from your Factory installed radio.
Simplified, your factory radio talks a different electronic language to the aftermarket CD changer. So the CD changer interface adaptor simply translates this so both components can communicate and work in synergy.
So if you already have a Pioneer CD changer using this interface adaptor is perfect for a low cost upgrade producing outstanding sounding results.
CD Changer Interface Adaptor Installation
Pioneer CD Changer interface adaptors install at the rear of your radio or onto the pre-wired CD lead (if applicable) for your particular car make and model and the CD Changer connects to the other side of the interface adaptor by push-fit connection.
Interface Adaptor installation to the car wiring is either by push-fit connection (in the majority of cars) or alternatively by connecting 2 wires from a choice of 3 sources (earth, 12v or 12v switched). To aid you with installation comprehensive installation instructions are included.
Pioneer CD Changer Installation
CD Changer installation is generally far easier than you would expect. Pioneer CD Changers can mount in the boot, glove box or even under a seat and offer multi-angle mounting for installation flexibility. (Compare this CD changers dimensions with your available space)
Connection is via the included 5M robust data lead by push-fit connection to one side of the CD Changer interface adaptor, and this lead is simply tucked under your interior plastic trim out of site. The other side of the interface adaptor connects to the car wiring as detailed above.
The CD changer is mounted using the included brackets and screws, or for easy installation FREE Adhesive Velcro is available if required (request this via email after ordering). Full installation instructions are supplied with each changer. Modern suspension technology allows skip free play-back from your home burned CD-Rs and CD-RWs as well as original CDs.
Average installation time by our customers is between 30 to 60 minutes enabling any basic DIYer to install this product comfortably giving you endless hours of music in under an hour.
Recommended Professional Installation Service:
If like many of our customers, you would prefer an Installation Professional to help, we highly recommend InCar-Installer.com the UK's Leading In-Car Nationwide Installation Service company.
Alternatively look in your local Yellow Pages under the (Car Electrics & Car Audio) categories or visit Yell.com to find an installer in your area. If you would like to have the installation carried out at your home or workplace, look for a mobile installer in the advert or ask when you call them if they offer this service. You'll be surprised, that you find it's cheaper for someone to call to you and install it than to leave it at some fancy garage.
Your IP Address (38.103.63.59)